Mojave Bootable Drive

To create a bootable Mac drive you need any disk with Mac OS X 10.11.0 El Capitan or newer (10.12 Sierra, 10.13 High Sierra, 10.14 Mojave, up to 10.15 (Catalina) either running as your main system, or just being installed on a drive that's connected to your Mac at the moment. Create macOS Mojave bootable USB from Windows with Clover Boot Disk June 6, 2017 Tu Nguyen 209 Comments Clover Boot Disk includes tools and partition images to help you create macOS Mojave bootable USB from Windows in just a few clicks.

Updates

The macOS Mojave installer software is just over 6GB, so you need a USB external drive that can hold that much data. The drive can be a thumb drive, hard drive, or SSD. If you want to use a thumb. A more openly successful way to get a bootable usb is to set up a Mac VM in Windows, then use that to create your USB and install Clover. I'm sure I could dig up a guide if you're interested. Otherwise, if you have a mac, or know someone who does, you could always use that to create your USB.

Important Notes:

Using APFS is REQUIRED in Mojave in order to receive system updates via the normal Software Update method. If you choose to continue using macOS Extended (Journaled) as your filesystem type, you will NOT receive System Updates via System Preferences. If you are not using APFS, you can follow the 10.14.1 installation steps below.

After applying ANY system update via Software Update, re-applying post-install patches using your Mojave Patcher installer volume will most likely be necessary. If you install a software update and the system fails to boot afterwards, this is what needs to be done.

10.14.6

10.14.6 can be updated normally via Software Update if using an APFS volume, and will need to be patched using an installer volume created with Mojave Patcher version 1.3.2 or later after installing.

10.14.5

10.14.5 can be updated normally via Software Update if using an APFS volume, and will need to be patched using an installer volume created with Mojave Patcher version 1.3.1 or later after installing.

10.14.4

10.14.4 adds new changes that ARE NOT patchable by the post-install tool of Mojave Patcher v1.2.3 and older! Before updating to 10.14.4, you you will need to use the latest Mojave Patcher version to create a new installer volume, using the 10.14.4 installer app. Then, update to 10.14.4, either by installing via Software Update, or by just using the installer volume you've created to install. Install snow leopard from dvd ripper.

10.14.3

If you are currently running 10.14.1 or 10.14.2, you can simply use the Software Update pane of System Preferences (if using APFS) to apply the 10.14.3 update. Once the update is installed, you will most likely need to re-apply post-install patches to get the system to boot again. This process is detailed in steps 8 - 10 above. If you are currently running 10.14.0, you'll need to proceed with the 10.14.1 update method described below.

10.14.2

If you are currently running 10.14.1, you can simply use the Software Update pane of System Preferences (if using APFS) to apply the 10.14.2 update. Once the update is installed, you will most likely need to re-apply post-install patches to get the system to boot again. This process is detailed in steps 8 - 10 above. If you are currently running 10.14.0, or are using a non-AFPS volume, you'll need to proceed with the 10.14.1 update method described below. Diskmaker for snow leopard.

Mojave Bootable External Drive

How To Create A Mac Os Mojave Bootable Drive

10.14.1/macOS Extended (Journaled) volumes